Kenneth Civello MD, MPH
A guide for my patients

Record an ECG on your Pixel Watch or Fitbit

Some Pixel Watch and Fitbit models can record a 30 second ECG of your heart rhythm. The result tells you whether the rhythm looks normal, looks like AFib, or could not be read. Here is how to set it up, how to get a clean reading, and what to do with the result.

From Dr. Kenneth Civello, MD, MPH, cardiologist and electrophysiologist

Drawn example, not a real tracing 30 seconds
It is a one lead ECG you start yourself.

When you touch the sensor, the watch records the electrical signal of your heart for 30 seconds. Google says it is similar to a Lead I ECG, one of the views on a hospital ECG. It can tell AFib apart from a normal rhythm. It cannot find every heart problem, and only a doctor can diagnose AFib.

Which watches

Every Google Pixel Watch, from the first model through Pixel Watch 5. On the first Pixel Watch, the Metal Mesh and Metal Slim bands do not work with ECG.

Which Fitbits

Fitbit Charge 5, Charge 6, Sense (running Fitbit OS 5.0 or later), Sense 2, and Google Fitbit Edge. Other Fitbits do not have it.

Which app

The Google ECG app on the watch, and the Google Health app on your phone. On May 19, 2026, the Fitbit app became the Google Health app. Some devices still call it the Fitbit app.

Who can use it

Adults 22 and older, in the United States and other supported places. Outside a supported place you get an error message.

FDA status

FDA cleared (510(k) K200948). In a study of 440 people, Google says it found AFib correctly 98.7% of the time and a normal rhythm 100% of the time.

Call 911 if you feel very unwell

If you have chest pain, shortness of breath, fainting, or you feel very unwell, call 911. Do not stop to record an ECG.

Set it up

You do this once. The steps differ between a Pixel Watch and a Fitbit, so follow the list for your device. If you are setting up AFib alerts too, see Set up your Fitbit or Pixel Watch to check for AFib.

On a Pixel Watch

  1. Install the Google ECG app on the watch

    On your watch, open the Play Store app. Search for the Google ECG app. Tap it, then tap Install.

  2. Open it once

    If the Google Health app is not set up on your phone yet, the watch asks you to set it up first.

  3. Finish setup on your phone

    Open the Google Health app and tap the Health tab. Under Health checks, tap ECG. On some phones this section is called Detection and self screening. Tap Get started and follow the instructions.

On a Fitbit

  1. Install the ECG app from your phone

    Open the Google Health app. Tap Connections, then your device. Tap Apps. In the list, tap ECG, then Install.

  2. Finish setup on your phone

    In the Google Health app, tap the Health tab. Under Health checks, tap ECG. Tap Get started and follow the instructions.

Where to find the ECG app on your device

On a Pixel Watch, press the crown. On a Fitbit Sense 2, press the button. On a Fitbit Charge 5, Charge 6, Sense, or Google Fitbit Edge, swipe left on the screen.

Record an ECG

The sensor sits in a different place on each device. Place your fingers as shown on the screen. Follow the screen for your model.

Pixel Watch

The sensor is on the crown, the dial on the side, and on the back of the watch. The back touches your wrist. You touch the crown.

Fitbit

On the Charge 5, Charge 6, Sense, Sense 2, and Google Fitbit Edge, the sensor is the metal frame around the face. The back touches your wrist. You touch the frame.

  1. Wear it snug

    Wear the device snugly, a finger's width above your wrist bone, on the wrist you chose in setup.

  2. Sit down and open the ECG app

    The app can take several seconds to load. The screen stays black while it does. If Do Not Disturb is off, the device turns it on for you so the reading is not interrupted.

  3. Start the reading

    Follow the instructions on the device to start.

  4. Touch the sensor

    Place your fingers as shown on the screen.

  5. Sit still for 30 seconds

    Keep your feet on the floor. Rest your forearms and wrists on a table in front of you. Hold your fingers in place until the countdown ends. Do not touch other parts of the device or your wrist. If you lift your fingers or move too much, the countdown starts over.

  6. Read your result

    When the result appears, swipe up to see the full report.

  7. Let it sync

    Open the Google Health app on your phone. Your result moves from the device to the app. A Pixel Watch needs Wi-Fi or LTE to sync the ECG.

Before you record

These are Google's own tips for a clean reading. Tick each one as you go. Nothing you tick leaves this device.

Why these steps matter

The sensor picks up a very small electrical signal through your skin. Movement, a loose fit, sweat, and nearby electronics all add noise to that signal. When the noise is too high, the app cannot read the rhythm and calls the result inconclusive.

What your result means

There are three results. Inconclusive has three different causes, and the report tells you which one.

Normal sinus rhythm

Google's words: "Your heart rhythm appears normal." This is the usual rhythm of a healthy heart. It does not rule out every heart problem.

Atrial fibrillation

Google's words: "Your heart rhythm shows signs of AFib. You should contact your doctor." See the next section.

Inconclusive: heart rate over 120

The app cannot judge the rhythm when your heart rate is over 120 beats per minute. Google lists recent exercise, stress, alcohol, dehydration, infection, and AFib or another arrhythmia as causes.

Inconclusive: heart rate under 50

The app cannot judge the rhythm when your heart rate is under 50. Google lists some medicines, such as beta blockers or calcium channel blockers, very good aerobic fitness, and other arrhythmias as causes.

Inconclusive: poor signal

The signal was not clean enough. Google lists moving too much, not resting your hands on a table, a loose fit, uneven or hard breathing, the wrong wrist, and nearby electronics.

For a poor signal, go back through the checklist above and try again. If you keep getting inconclusive results, or you do not feel well, Google says to talk to your doctor. See My watch ECG says inconclusive.

After an AFib result

Stay calm. One result is not a diagnosis, but it is a reason to call.

  1. Check how you feel

    If you have chest pain, shortness of breath, fainting, or feel very unwell, call 911.

  2. Save the PDF

    Export the report as a PDF, as shown below. A doctor can read the tracing itself, not just the label.

  3. Write down what you felt

    Note the date, the time, and any symptoms, such as a racing or fluttering heart.

  4. Call your doctor

    If you are my patient, call my office at (225) 767-3900. If you already have AFib, tell us when you get results like this so we can see how often it happens.

To learn what happens next, read My watch says I have AFib.

Save the PDF for your doctor

The PDF shows the tracing, the result, and the date and time. It is the file to bring or send.

  1. Open your ECG results

    Open the Google Health app and tap the Health tab. Under Health checks, tap ECG. Your recent results show with the date and time. Tap Show more for older ones.

  2. Pick a result

    Tap the result you want to see in detail.

  3. Export it

    Tap Export PDF for your provider, then Download PDF. Name the report and save it.

Google suggests opening the report with the latest version of Adobe Acrobat Reader. For how to send it and what else you can share, see Share your Pixel Watch or Fitbit heart data with your doctor.

Common questions

Does my Fitbit have the ECG app?

Only these Fitbits have it: Charge 5, Charge 6, Sense running Fitbit OS 5.0 or later, Sense 2, and Google Fitbit Edge. Every Google Pixel Watch has it.

Which finger do I use?

Place your fingers as shown on the screen. On a Pixel Watch you touch the crown. On a Fitbit you touch the metal frame around the face. The back of the device stays on your wrist.

Why does the countdown keep starting over?

The countdown restarts if you lift your fingers or move too much. Rest your forearms on a table, keep your feet on the floor, and hold still until it ends.

My heart rate is often under 50. Can I still use it?

The app cannot judge your rhythm when your heart rate is under 50, so you may get inconclusive results. Medicines like beta blockers and very good fitness can cause this. Ask your doctor how to check your rhythm another way.

Can the watch ECG find a heart attack?

No. Google says it cannot detect all heart conditions. It only tells AFib apart from a normal rhythm. If you have chest pain, call 911.

Why do I not see my result in the app?

Results move to your phone when you open the Google Health app. A Pixel Watch needs Wi-Fi or LTE to sync the ECG. Open the app and wait for it to sync.

This page is general education for my patients. It does not replace advice from your own doctor. Watch ECG apps are not a diagnosis. Fitbit, Pixel Watch, Google Health, and Google ECG are trademarks of Google LLC. This page is not affiliated with Google. Steps match Google Health Help in November 2026, after the Fitbit app became the Google Health app.

Based on: Joglar JA, et al. 2023 ACC/AHA/ACCP/HRS Guideline for the Diagnosis and Management of Atrial Fibrillation. Circulation. 2024. FDA 510(k) K200948, Fitbit ECG App. Google Health Help, What is the Google ECG app? and Changes in the Google Health app, accessed November 2026. Google Pixel Watch Help, Track your health, heart rate and ECG with Google Health on Pixel Watch, accessed November 2026.